• Subscribe to RSS
  • Subscribe via Email
  • Technorati


AllSAFE Raises Safety and Regulatory Concerns over EPA’s Consideration of Partial Fuel Waiver for Ethanol

Alexandria, VA – July 16, 2009 – The Alliance for a Safe Alternative Fuels Environment (AllSAFE), which speaks for manufacturers on fuel-related legislation representing 400 million products that over 250 million Americans own and operate, including recreational boats and marine engines, chainsaws, lawnmowers, motor vehicles, motorcycles, all terrain vehicles (ATVs), snowmobiles, generators, and related vehicles and equipment, announced today that it delivered official comments voicing concern to the Environmental Protection Agency (EPA) about Growth Energy’s fuel waiver application for E-15.

AllSAFE’s comments also address concerns over EPA’s expansion of the waiver request to include “bifurcating” the fuel supply, or allowing two fuels (E-10 and E-15) in the marketplace at one time via the 211(f)(4) fuel waiver process.  To read AllSAFE’s comments to the EPA, visit allsafe-fuel.org or www.OPEI.org.

“AllSAFE’s comments clearly establish that E-15 has not been sufficiently tested and poses a hazard that could potentially bring physical endangerment to consumers,” said Kris Kiser, spokesman for AllSAFE. “With the additional concern of a ‘bifurcated fuel’ supply, the EPA has not evaluated all the complex issues, such as misfueling, which again, leads to permanent damage of non-road equipment and older vehicles and poses a risk of personal harm to the consumer. These concerns deserve a full evaluation through the proper section of the federal Clean Air Act and should not be insufficiently addressed through a fuel waiver request.”

In EPA’s response to Growth Energy’s waiver application, comments were requested by EPA on a potential “partial fuel waiver” that would in concept only apply to certain newer on-road vehicles. EPA’s “partial waiver” concept would be based on somehow bifurcating the national production, distribution, blending, and marketing of separate E-10 fuels (for non-road products and older automobiles) and then offering E-15 fuels for newer automobiles only.

In practice, consumers would now be faced with two fuel pumps at any given station – one with E-10 and one with E-15.  “AllSAFE has strongly cautioned the EPA against such a measure since consumers could be confused and possibly use the wrong fuel, especially if they see that E-15 is cheaper and choose that blend rate to save money,” said Kiser.

In its comments, AllSAFE pointed out that EPA’s  attempt to offer leaded and unleaded fuels via two separate pumps was not completely successful. Even with education and physical barriers against misfueling at the fuel pump and on the automobile, misfueling still occurred with 13.5 % of vehicles needing unleaded gasoline (based on EPA’s own misfueling study). With no physical barrier and a price differential that would encourage misfueling, the potential for physical harm to consumers must be addressed before bifurcation is considered.

AllSAFE’s comments also point out that from a legal and public policy standpoint, the EPA cannot approve any “partial” mid-level ethanol fuel waiver until  EPA has completed a separate rulemaking process under section 211(c) to prevent misfueling.

In 2007, Congress expanded and strengthened Section 211(f)(4), which specifically directed EPA to only approve a fuel waiver if all non-road and on-road engines or vehicles would not be adversely impacted with regard to their applicable emission standards.  Yet, Section 211(f)(4) does not create the legal authority for EPA to establish a “partial waiver” based on a bifurcated fuel “concept.”

In summary, AllSAFE recommends that the EPA deny the Growth Energy E-15 partial waiver request at this time for the following reasons:

· Use of E15 fuel cannot be legally or practically controlled through a partial waiver without causing wide-spread misfueling, engine damage, and potential for physical harm to consumers.

· The waiver application does not include most of the information EPA has outlined as required supporting information.

· The data supplied with the waiver application does not support the claims made regarding the emission and operability influence of E-15 fuel.

· Use of E-15 fuel is expected to result in “materials incompatibility”

· Use of E-15 fuel is expected to cause unacceptable engine and/or equipment “operability”– resulting in an increase in “tampering.”

· Use of E15 fuel has been demonstrated to result in increased exhaust emission of HC+NOx and significantly higher exhaust gas temperatures resulting in engine degradation.

· Use of E-15 fuel is expected to result in increased evaporative emissions.

· Use of E-15 fuel would increase national emissions based on well-established predictive modeling.

About AllSAFE

AllSAFE is made up of national consumer, manufacturing, and gasoline retailer associations (listed below) that consume gasoline and ethanol fuel blends (listed below).  AllSAFE speaks for manufacturers on fuel-related legislation representing 400 million products that over 250 million Americans own and operate, including recreational boats and marine engines, chainsaws, lawnmowers, motor vehicles, motorcycles, all terrain vehicles (ATVs), snowmobiles, generators, and related vehicles and equipment.  For more information, go to http://allsafe-fuel.org/.

AllSAFE Members

Alliance of Automobile Manufacturers

Motorcycle Industry Council

American Motorcyclist Association

National Association of Convenience Stores

Association of Marina Industries

National Marine Manufacturers Association

Association of International Automobile Manufacturers

Outdoor Power Equipment Institute

Boat Owners Association of the United States

Personal Watercraft Industry Association

Engine Manufacturers Association

Professional Landcare Network

Motor & Equipment Manufacturers Association (MEMA)

Specialty Vehicle Institute of America

About the Outdoor Power Equipment Institute

OPEI is an international trade association representing the $15 billion landscape, forestry, utility and lawn and garden equipment manufacturing industry. OPEI is a recognized Standards Development Organization for the American National Standards Institute (ANSI) and active internationally through the International Standards Organization (ISO) in the development of safety standards. Founded in 1952, OPEI represents and promotes the outdoor power equipment industry and ensures the public may continue to benefit from the economic, lifestyle and environmental contributions of landscapes and turfgrass. For more information on OPEI, visit www.OPEI.org.

###

Overcoming The Language Barrier

I was recently speaking with Larry Upton of edioma and their new product called iDigo. iDigo is a program that runs on the iPhone. Have a read through the press release and let me know what your thoughts are about this product.

edioma™ SHIPS IDIGO – IPHONE LANGUAGE ASSISTANCE APPLICATION

AUSTIN, TX – edioma™, a provider of mobile device learning products, today announced that it began shipping iDigo Home, an iPhone-based language assistance application designed to help English-speaking homeowners communicate with Spanishspeaking staff (e.g., housekeepers, lawncare workers, handymen). iDigo Home is the first in a line of iPhone applications that edioma plans to introduce in Q3 and Q4 of 2009.

edioma_idigo_screenshots_plain002edioma_idigo_screenshots_plain001

Future versions of iDigo will focus on facilitating communication between management and staff in specific industry verticals, such as Hospitality (restaurant/hotel), Jobsite (construction), and Travel (business travelers).

edioma partners with Lighter Fluid Studios, an Austin-based development and publishing company. The two companies share a common view that mobile phonebased language assistance is a vital solution to bridge the “communication gap” between English- and Spanish-speakers who are required to interact in the work place. There are currently over 45 million U.S. Hispanics, nearly 40% who are categorized as “Spanishdependent.”

edioma’s iDigo platform is the first iPhone language assistance product to target non-travel-based communication needs,” said Larry Upton, edioma founder and CEO. “We’re convinced that a rapidly expanding market exists for smart-phone products that facilitate multi-lingual communication, especially where jobsite productivity is concerned.” Fortune 500 companies with sizable Spanish-speaking employees, such as Wal-Mart (165,000 Hispanic employees), stand to benefit from using iDigo as a communication solution to increase workplace productivity and reduce human resource management costs.

Lighter Fluid Studios principal Darrell Petty said, “iDigo stands apart from other language assistance products, because it’s elegant and easy to use. iDigo guides the user through a simple process that delivers relevant phrases for a wide variety of common situations.” Lighter Fluid and edioma plan to release ported versions of iDigo for Blackberry and Android smart-phones in Q3 2009.

About edioma
edioma develops and publishes mobile education services for Spanish/English speaking wireless subscribers. edioma is a privately-held corporation headquartered in Austin, Texas. For more information, please contact info@edioma.com.

About Lighter Fluid Studios
Lighter Fluid Studios helps companies turn ideas into commercial success. Light Fluid designs, develops, and supports a variety of enterprise software and mobile application products via joint investments or shared development partnerships. For more information on Lighter Fluid, please visit www.lighterfluidstudios.com.

# # #

Contact:
Mike Crixell
mike.crixell@edioma.com
+1.512.327.1800

Equipment Maintenance – Part One Trimmers

Well with spring on our doorstep and our feet itchy as ever to get started; there are a few things to do with our equipment before we put them through the paces.  This will be the first part of a multi-post on equipment maintenance.  All equipment repairs and maintenance should be recorded.  This is a good pratice for tracking equipment costs and a great tool for resale.  Just make a book dedicated to equipment log…it is easier than you think.

Trimmers

Trimmers are very easy to maintain (most of the time).  Here are some basic and advanced tips to keep you up and running.

Basic (minimal dis-assembly)

Clean out the spool and replace any line left over from last year.  Last years line will be brittle and dried out, time for some new line.  You should also make sure to use up your line before storing it for the winter.  If you have left over line bring it indoors out of the cold (if you live in a cold climate…I am in Ontario, Canada.), you can even soak the line in water to avoid it drying out while you store it.

Replace the spark plug.  Running trimmer engines at full throttle days in and out is hard work for spark plug.  Old plugs can become fouled and need to be replaced.  I recommend replacing them every spring (depending on use you may wish to change them twice per year) and make note of the date in your equipment log.

Replace the fuel filter.  Fuel filters are usuallay located in the fuel tank of most newer modles.  However on older trimmers you may find in-line filter as well.  A plugged up fuel filter puts the engine under stress and it may not run properly; stalling, spitting and sputtering.  Make note of the replacement in your equipment maintenance log book.

Take off the muffler and clean out all of the carbon buildup.  This is a good time to clean out your spark arrestor as well (that little piece of screen on the muffler exit).  If your trimmer cannot relieve it self of its exhaust it will run poorly and there will be a lack of power.  All too many times where a trimmer has a lack of power it will be the exhaust port and muffler clogged with carbon.  Use a small flat head screwdrive to scrap off the excess carbon.  But remember that trimmer heads are made out of alilumimun and you can damage then with a sharp instrument…so be careful.

Grease the gearbox on the trimmer head.  Most trimmers have a grease nipple on the gearbox.  I use a water based white lithium grease.  It is easier to clean and acts to heat better then a standard grease.  If your trimmer does not have a grease nipple (such as my RedMax) you can take apart your trimmer head to expose the gearbox and manually grease it.  If you are not sure how to do this you can bring it in to your small equipment shop.

Advanced (rip it apart!)

Change the carburetor diaphragm and filters.  Over time your carb can become gummed up and the diaphragm become worn and stretched.  This step requires a very clean working area as the smallest piece of sand or dirt can affect the performance of the trimmer (if it runs at all).

Clean and grease the drive shaft.  Most solid drive shafts require you to keep them clean and greased.  Doing this is simple.  Remove the engine from the shaft and the drive shaft should slide out.  Use a clean rag to wipe off all old grease and dirt and apply new grease where needed.  Always check with your owners manual to see if your trimmer needs this step.

Replace your clutch spring.  Over time the small clutch spring will become less tense.  If your trimmer head still wants to spin even when your finger is off of the throttle you need to replace your spring.  This is an easy fix but requires you to remove the engine from the shaft.  The spring holds the two clutch shoes together…this will also be a good time to examine the shoes and clutch drum for wear.  Blow out any dirt in the drum as it will only speed up the wear process.

Those tips and tricks will keep your trimmer running at its best.  We all at times take our equiment for granted and the work that they perform.  A two stroke engine should last forever if you take care of it.

Please leave a comment and let us all know what you do to maintain your trimmers.

Submit your lawn care product for review

The message is going out to all manufacturers, software developers or anyone who contributes a product for the green industry. We are currently looking for products to review for our new ‘Green Industry Product Review’ section. If you are interested to have your product featured and reviewed please send all requests to office@thelawnblog.com

Propane Powered Line Trimmer

I was sent this video about a propane powered line trimmer. Check out the video and let me know your thoughts.

Get Adobe Flash playerPlugin by wpburn.com wordpress themes